Identification: what type of connector does the pictured socket take?What type of 2x4 connector is this?Cable connector type identificationIndustry standard ways of connecting boards / modules?What type is this connector?What type of connector is thisWhat type is the connector?Pinout for board to board ribbon cablecircular connector identification?Identifying VW head-unit connector typesConnector Identification
Is it possible to have battery technology that can't be duplicated?
Can a 40amp breaker be used safely and without issue with a 40amp device on 6AWG wire?
What publication claimed that Michael Jackson died in a nuclear holocaust?
The best in flight meal option for those suffering from reflux
How do I properly use a function under a class?
Do they make "karaoke" versions of concertos for solo practice?
How can I find out about the game world without meta-influencing it?
As easy as Three, Two, One... How fast can you go from Five to Four?
Jam with honey & without pectin has a saucy consistency always
Can I use 220 V outlets on a 15 ampere breaker and wire it up as 110 V?
Is there a radar system monitoring the UK mainland border?
What class is best to play when a level behind the rest of the party?
Why would a home insurer offer a discount based on credit score?
Is time complexity more important than space complexity?
Approach sick days in feedback meeting
Why did the AvroCar fail to fly above 3 feet?
Harley Davidson clattering noise from engine, backfire and failure to start
What's the relation between у.е. to USD?
Changing the PK column of a data extension without completely recreating it
Are athlete's college degrees discounted by employers and graduate school admissions?
Why didn't all the iron and heavier elements find their way to the center of the accretion disc in the early solar system?
What is Gilligan's full name?
What do I need to do, tax-wise, for a sudden windfall?
How do I type a hyphen in iOS 12?
Identification: what type of connector does the pictured socket take?
What type of 2x4 connector is this?Cable connector type identificationIndustry standard ways of connecting boards / modules?What type is this connector?What type of connector is thisWhat type is the connector?Pinout for board to board ribbon cablecircular connector identification?Identifying VW head-unit connector typesConnector Identification
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty margin-bottom:0;
$begingroup$
The picture was taken off an equipment we are trying to connect to. Unfortunately the connector type was not specified in user manual.
The closest one I can find based on shape is molex 4 pin female connector, or 4 pin peripheral connector used to send power to CD/hard drive in desktops.The difference is, molex connectors have flat sides, while the socket in picture has curves around each pin.
Could anyone offer some clue?
connector
edited 4 hours ago
laptop2d
32.2k123899
asked 8 hours ago
Zhiyong LiZhiyong Li
80110
$endgroup$
add a comment |
$begingroup$
The picture was taken off an equipment we are trying to connect to. Unfortunately the connector type was not specified in user manual.
The closest one I can find based on shape is molex 4 pin female connector, or 4 pin peripheral connector used to send power to CD/hard drive in desktops.The difference is, molex connectors have flat sides, while the socket in picture has curves around each pin.
Could anyone offer some clue?
connector
edited 4 hours ago
laptop2d
32.2k123899
asked 8 hours ago
Zhiyong LiZhiyong Li
80110
$endgroup$
1
$begingroup$
Pluggable terminal block. Probably something like one of these.
$endgroup$
– brhans
8 hours ago
add a comment |
$begingroup$
The picture was taken off an equipment we are trying to connect to. Unfortunately the connector type was not specified in user manual.
The closest one I can find based on shape is molex 4 pin female connector, or 4 pin peripheral connector used to send power to CD/hard drive in desktops.The difference is, molex connectors have flat sides, while the socket in picture has curves around each pin.
Could anyone offer some clue?
connector
edited 4 hours ago
laptop2d
32.2k123899
asked 8 hours ago
Zhiyong LiZhiyong Li
80110
$endgroup$
The picture was taken off an equipment we are trying to connect to. Unfortunately the connector type was not specified in user manual.
The closest one I can find based on shape is molex 4 pin female connector, or 4 pin peripheral connector used to send power to CD/hard drive in desktops.The difference is, molex connectors have flat sides, while the socket in picture has curves around each pin.
Could anyone offer some clue?
connector
connector
edited 4 hours ago
laptop2d
32.2k123899
asked 8 hours ago
Zhiyong LiZhiyong Li
80110
edited 4 hours ago
laptop2d
32.2k123899
asked 8 hours ago
Zhiyong LiZhiyong Li
80110
edited 4 hours ago
laptop2d
32.2k123899
edited 4 hours ago
laptop2d
32.2k123899
edited 4 hours ago
laptop2d
32.2k123899
32.2k123899
asked 8 hours ago
Zhiyong LiZhiyong Li
80110
asked 8 hours ago
Zhiyong LiZhiyong Li
80110
asked 8 hours ago
Zhiyong LiZhiyong Li
80110
80110
1
$begingroup$
Pluggable terminal block. Probably something like one of these.
$endgroup$
– brhans
8 hours ago
add a comment |
1
$begingroup$
Pluggable terminal block. Probably something like one of these.
$endgroup$
– brhans
8 hours ago
1
1
$begingroup$
Pluggable terminal block. Probably something like one of these.
$endgroup$
– brhans
8 hours ago
$begingroup$
Pluggable terminal block. Probably something like one of these.
$endgroup$
– brhans
8 hours ago
add a comment |
3 Answers
3
active
oldest
votes
$begingroup$
Thats a terminal block header probably the same one shown below:
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTOQ045451/ED2830-ND/1588283
The terminal block plug can be found below
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTTS04515A/ED2863-ND/1588621
answered 8 hours ago
laptop2dlaptop2d
32.2k123899
$endgroup$
$begingroup$
Out of 3 different answers this answer shows the PCB mount and correct pin diam. +1 for being a good component Eng. with attention to details.
$endgroup$
– Sunnyskyguy EE75
6 hours ago
$begingroup$
the actual component is more likely the following one judging from the two mounting holes: digikey.com/product-detail/en/phoenix-contact/1776524/…
$endgroup$
– Zhiyong Li
5 hours ago
add a comment |
$begingroup$
That is a Camdenboss CTBP9350/4 (or equivalent). The mating plugs are:
- CTBP9200/4
- CTBP92VG/4R
They are available from all major distributors (Farnell, RS, Digikey, Mouser, Arrow, etc..).
answered 8 hours ago
CursorkeysCursorkeys
769210
$endgroup$
1
$begingroup$
thank you so much.Have been searching for it the whole morning. Remember seeing them here or there, but the name always evades me.
$endgroup$
– Zhiyong Li
8 hours ago
$begingroup$
My pleasure, we use a lot of them on control equipment. Customers love that you can wire them, then connect them. As opposed to standard screw-terminals which can be awkward.
$endgroup$
– Cursorkeys
8 hours ago
add a comment |
$begingroup$
These connectors are most known from the Phoenix Contact Combicon family.
The shown socket mates with MSTB 2,5 HC/ 4-STF (1912090), however the metal plating inhibits the locking screws. So use MSTB 2,5 HC/ 4-ST (1911871).
That is assuming it's 5 mm. If it's 5.08 mm then add "-5.08".
However with a 4 pin you can just use more force...
Or get any of the other terminations they offer, they have a lot of choice. (eg: straight/angled or cage/spring)
answered 7 hours ago
Jeroen3Jeroen3
12.2k1950
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
return StackExchange.using("schematics", function ()
StackExchange.schematics.init();
);
, "cicuitlab");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "135"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f443095%2fidentification-what-type-of-connector-does-the-pictured-socket-take%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Thats a terminal block header probably the same one shown below:
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTOQ045451/ED2830-ND/1588283
The terminal block plug can be found below
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTTS04515A/ED2863-ND/1588621
answered 8 hours ago
laptop2dlaptop2d
32.2k123899
$endgroup$
$begingroup$
Out of 3 different answers this answer shows the PCB mount and correct pin diam. +1 for being a good component Eng. with attention to details.
$endgroup$
– Sunnyskyguy EE75
6 hours ago
$begingroup$
the actual component is more likely the following one judging from the two mounting holes: digikey.com/product-detail/en/phoenix-contact/1776524/…
$endgroup$
– Zhiyong Li
5 hours ago
add a comment |
$begingroup$
Thats a terminal block header probably the same one shown below:
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTOQ045451/ED2830-ND/1588283
The terminal block plug can be found below
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTTS04515A/ED2863-ND/1588621
answered 8 hours ago
laptop2dlaptop2d
32.2k123899
$endgroup$
$begingroup$
Out of 3 different answers this answer shows the PCB mount and correct pin diam. +1 for being a good component Eng. with attention to details.
$endgroup$
– Sunnyskyguy EE75
6 hours ago
$begingroup$
the actual component is more likely the following one judging from the two mounting holes: digikey.com/product-detail/en/phoenix-contact/1776524/…
$endgroup$
– Zhiyong Li
5 hours ago
add a comment |
$begingroup$
Thats a terminal block header probably the same one shown below:
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTOQ045451/ED2830-ND/1588283
The terminal block plug can be found below
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTTS04515A/ED2863-ND/1588621
answered 8 hours ago
laptop2dlaptop2d
32.2k123899
$endgroup$
Thats a terminal block header probably the same one shown below:
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTOQ045451/ED2830-ND/1588283
The terminal block plug can be found below
Source: https://www.digikey.com/product-detail/en/on-shore-technology-inc/OSTTS04515A/ED2863-ND/1588621
answered 8 hours ago
laptop2dlaptop2d
32.2k123899
answered 8 hours ago
laptop2dlaptop2d
32.2k123899
answered 8 hours ago
laptop2dlaptop2d
32.2k123899
answered 8 hours ago
laptop2dlaptop2d
32.2k123899
32.2k123899
$begingroup$
Out of 3 different answers this answer shows the PCB mount and correct pin diam. +1 for being a good component Eng. with attention to details.
$endgroup$
– Sunnyskyguy EE75
6 hours ago
$begingroup$
the actual component is more likely the following one judging from the two mounting holes: digikey.com/product-detail/en/phoenix-contact/1776524/…
$endgroup$
– Zhiyong Li
5 hours ago
add a comment |
$begingroup$
Out of 3 different answers this answer shows the PCB mount and correct pin diam. +1 for being a good component Eng. with attention to details.
$endgroup$
– Sunnyskyguy EE75
6 hours ago
$begingroup$
the actual component is more likely the following one judging from the two mounting holes: digikey.com/product-detail/en/phoenix-contact/1776524/…
$endgroup$
– Zhiyong Li
5 hours ago
$begingroup$
Out of 3 different answers this answer shows the PCB mount and correct pin diam. +1 for being a good component Eng. with attention to details.
$endgroup$
– Sunnyskyguy EE75
6 hours ago
$begingroup$
Out of 3 different answers this answer shows the PCB mount and correct pin diam. +1 for being a good component Eng. with attention to details.
$endgroup$
– Sunnyskyguy EE75
6 hours ago
$begingroup$
the actual component is more likely the following one judging from the two mounting holes: digikey.com/product-detail/en/phoenix-contact/1776524/…
$endgroup$
– Zhiyong Li
5 hours ago
$begingroup$
the actual component is more likely the following one judging from the two mounting holes: digikey.com/product-detail/en/phoenix-contact/1776524/…
$endgroup$
– Zhiyong Li
5 hours ago
add a comment |
$begingroup$
That is a Camdenboss CTBP9350/4 (or equivalent). The mating plugs are:
- CTBP9200/4
- CTBP92VG/4R
They are available from all major distributors (Farnell, RS, Digikey, Mouser, Arrow, etc..).
answered 8 hours ago
CursorkeysCursorkeys
769210
$endgroup$
1
$begingroup$
thank you so much.Have been searching for it the whole morning. Remember seeing them here or there, but the name always evades me.
$endgroup$
– Zhiyong Li
8 hours ago
$begingroup$
My pleasure, we use a lot of them on control equipment. Customers love that you can wire them, then connect them. As opposed to standard screw-terminals which can be awkward.
$endgroup$
– Cursorkeys
8 hours ago
add a comment |
$begingroup$
That is a Camdenboss CTBP9350/4 (or equivalent). The mating plugs are:
- CTBP9200/4
- CTBP92VG/4R
They are available from all major distributors (Farnell, RS, Digikey, Mouser, Arrow, etc..).
answered 8 hours ago
CursorkeysCursorkeys
769210
$endgroup$
1
$begingroup$
thank you so much.Have been searching for it the whole morning. Remember seeing them here or there, but the name always evades me.
$endgroup$
– Zhiyong Li
8 hours ago
$begingroup$
My pleasure, we use a lot of them on control equipment. Customers love that you can wire them, then connect them. As opposed to standard screw-terminals which can be awkward.
$endgroup$
– Cursorkeys
8 hours ago
add a comment |
$begingroup$
That is a Camdenboss CTBP9350/4 (or equivalent). The mating plugs are:
- CTBP9200/4
- CTBP92VG/4R
They are available from all major distributors (Farnell, RS, Digikey, Mouser, Arrow, etc..).
answered 8 hours ago
CursorkeysCursorkeys
769210
$endgroup$
That is a Camdenboss CTBP9350/4 (or equivalent). The mating plugs are:
- CTBP9200/4
- CTBP92VG/4R
They are available from all major distributors (Farnell, RS, Digikey, Mouser, Arrow, etc..).
answered 8 hours ago
CursorkeysCursorkeys
769210
answered 8 hours ago
CursorkeysCursorkeys
769210
answered 8 hours ago
CursorkeysCursorkeys
769210
answered 8 hours ago
CursorkeysCursorkeys
769210
769210
1
$begingroup$
thank you so much.Have been searching for it the whole morning. Remember seeing them here or there, but the name always evades me.
$endgroup$
– Zhiyong Li
8 hours ago
$begingroup$
My pleasure, we use a lot of them on control equipment. Customers love that you can wire them, then connect them. As opposed to standard screw-terminals which can be awkward.
$endgroup$
– Cursorkeys
8 hours ago
add a comment |
1
$begingroup$
thank you so much.Have been searching for it the whole morning. Remember seeing them here or there, but the name always evades me.
$endgroup$
– Zhiyong Li
8 hours ago
$begingroup$
My pleasure, we use a lot of them on control equipment. Customers love that you can wire them, then connect them. As opposed to standard screw-terminals which can be awkward.
$endgroup$
– Cursorkeys
8 hours ago
1
1
$begingroup$
thank you so much.Have been searching for it the whole morning. Remember seeing them here or there, but the name always evades me.
$endgroup$
– Zhiyong Li
8 hours ago
$begingroup$
thank you so much.Have been searching for it the whole morning. Remember seeing them here or there, but the name always evades me.
$endgroup$
– Zhiyong Li
8 hours ago
$begingroup$
My pleasure, we use a lot of them on control equipment. Customers love that you can wire them, then connect them. As opposed to standard screw-terminals which can be awkward.
$endgroup$
– Cursorkeys
8 hours ago
$begingroup$
My pleasure, we use a lot of them on control equipment. Customers love that you can wire them, then connect them. As opposed to standard screw-terminals which can be awkward.
$endgroup$
– Cursorkeys
8 hours ago
add a comment |
$begingroup$
These connectors are most known from the Phoenix Contact Combicon family.
The shown socket mates with MSTB 2,5 HC/ 4-STF (1912090), however the metal plating inhibits the locking screws. So use MSTB 2,5 HC/ 4-ST (1911871).
That is assuming it's 5 mm. If it's 5.08 mm then add "-5.08".
However with a 4 pin you can just use more force...
Or get any of the other terminations they offer, they have a lot of choice. (eg: straight/angled or cage/spring)
answered 7 hours ago
Jeroen3Jeroen3
12.2k1950
$endgroup$
add a comment |
$begingroup$
These connectors are most known from the Phoenix Contact Combicon family.
The shown socket mates with MSTB 2,5 HC/ 4-STF (1912090), however the metal plating inhibits the locking screws. So use MSTB 2,5 HC/ 4-ST (1911871).
That is assuming it's 5 mm. If it's 5.08 mm then add "-5.08".
However with a 4 pin you can just use more force...
Or get any of the other terminations they offer, they have a lot of choice. (eg: straight/angled or cage/spring)
answered 7 hours ago
Jeroen3Jeroen3
12.2k1950
$endgroup$
add a comment |
$begingroup$
These connectors are most known from the Phoenix Contact Combicon family.
The shown socket mates with MSTB 2,5 HC/ 4-STF (1912090), however the metal plating inhibits the locking screws. So use MSTB 2,5 HC/ 4-ST (1911871).
That is assuming it's 5 mm. If it's 5.08 mm then add "-5.08".
However with a 4 pin you can just use more force...
Or get any of the other terminations they offer, they have a lot of choice. (eg: straight/angled or cage/spring)
answered 7 hours ago
Jeroen3Jeroen3
12.2k1950
$endgroup$
These connectors are most known from the Phoenix Contact Combicon family.
The shown socket mates with MSTB 2,5 HC/ 4-STF (1912090), however the metal plating inhibits the locking screws. So use MSTB 2,5 HC/ 4-ST (1911871).
That is assuming it's 5 mm. If it's 5.08 mm then add "-5.08".
However with a 4 pin you can just use more force...
Or get any of the other terminations they offer, they have a lot of choice. (eg: straight/angled or cage/spring)
answered 7 hours ago
Jeroen3Jeroen3
12.2k1950
answered 7 hours ago
Jeroen3Jeroen3
12.2k1950
answered 7 hours ago
Jeroen3Jeroen3
12.2k1950
answered 7 hours ago
Jeroen3Jeroen3
12.2k1950
12.2k1950
add a comment |
add a comment |
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f443095%2fidentification-what-type-of-connector-does-the-pictured-socket-take%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
$begingroup$
Pluggable terminal block. Probably something like one of these.
$endgroup$
– brhans
8 hours ago