Set up public ip on serverWindows Server 2008 Routing / NAT - USB Wireless adapter not showing upTraceroute showing weird path. Is load balancing router is responsible for this?ufw portforwarding to virtualbox guestDomain Based Port Forwarding with VLAN routingSetting up a server that routes local traffic through vpn, while still being able to access internet directlyRouting two subnetworks through the same gatewayKVM port-forwarding from ppp0 to VM's bridged NIC not working, but to VM's NAT NIC works?additional public IP and local networkAllow transparent port forwarding in Azure subnetAfter adding firewall rule, why did my Discord get the error “No Route”?
Information to fellow intern about hiring?
Is it legal to have the "// (c) 2019 John Smith" header in all files when there are hundreds of contributors?
Manga about a female worker who got dragged into another world together with this high school girl and she was just told she's not needed anymore
Could a US political party gain complete control over the government by removing checks & balances?
Are cabin dividers used to "hide" the flex of the airplane?
Can I find out the caloric content of bread by dehydrating it?
aging parents with no investments
Can a planet have a different gravitational pull depending on its location in orbit around its sun?
New order #4: World
Copycat chess is back
Why did the Germans forbid the possession of pet pigeons in Rostov-on-Don in 1941?
extract characters between two commas?
Why do UK politicians seemingly ignore opinion polls on Brexit?
Need help identifying/translating a plaque in Tangier, Morocco
What is the meaning of "of trouble" in the following sentence?
Is domain driven design an anti-SQL pattern?
Extreme, but not acceptable situation and I can't start the work tomorrow morning
What happens when a metallic dragon and a chromatic dragon mate?
Unbreakable Formation vs. Cry of the Carnarium
Why is making salt water prohibited on Shabbat?
What do the Banks children have against barley water?
Synthetic Control Method
What does "enim et" mean?
Is Fable (1996) connected in any way to the Fable franchise from Lionhead Studios?
Set up public ip on server
Windows Server 2008 Routing / NAT - USB Wireless adapter not showing upTraceroute showing weird path. Is load balancing router is responsible for this?ufw portforwarding to virtualbox guestDomain Based Port Forwarding with VLAN routingSetting up a server that routes local traffic through vpn, while still being able to access internet directlyRouting two subnetworks through the same gatewayKVM port-forwarding from ppp0 to VM's bridged NIC not working, but to VM's NAT NIC works?additional public IP and local networkAllow transparent port forwarding in Azure subnetAfter adding firewall rule, why did my Discord get the error “No Route”?
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty height:90px;width:728px;box-sizing:border-box;
I am not quite sure if this should belong here but how do I add public ip to my server?
I wanted to launch a system in Server B live to internet. The problem is no physical connection is linked between my server(Server A) and the Server B.
What I noticed with Server B was:
- the server is using dynamic ip
- the server is located on the other street so cabling is not an option
- it has a default gateway 192.168.0.70.1
- I also noticed that only those PC's connected to the wifi was able to connect to the system.
I have read somewhere that assigning Public IP and Port Forwarding to Server B will probably help me launch that system live to the internet.
The problem is I have little/to no knowledge at networking and every term is like a puzzle to me.
routing port-forwarding
edited 5 hours ago
Community♦
1
asked 15 hours ago
marvin castromarvin castro
141
New contributor
marvin castro is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I am not quite sure if this should belong here but how do I add public ip to my server?
I wanted to launch a system in Server B live to internet. The problem is no physical connection is linked between my server(Server A) and the Server B.
What I noticed with Server B was:
- the server is using dynamic ip
- the server is located on the other street so cabling is not an option
- it has a default gateway 192.168.0.70.1
- I also noticed that only those PC's connected to the wifi was able to connect to the system.
I have read somewhere that assigning Public IP and Port Forwarding to Server B will probably help me launch that system live to the internet.
The problem is I have little/to no knowledge at networking and every term is like a puzzle to me.
routing port-forwarding
edited 5 hours ago
Community♦
1
asked 15 hours ago
marvin castromarvin castro
141
New contributor
marvin castro is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
2
The first step is to ask your ISP to assign you a public IP address if they don’t give you one by default. It might be either static or dynamic (accessible from outside but not guaranteed to be constant). This and many more things will influence further steps (see Mikael’s answer). Unfortunately, this question cannot be answered generally.
– Melebius
10 hours ago
It is also very unclear what the link to Server A is. You just mention it's not linked to Server B, but don't say a word about how is should be interacting with it (if at all). Which makes me think you could even be looking at VPN between A & B, and something like giving external access to Server B from Internet (might be achieved thru port forwarding on some your consumer grade router)
– user1532080
8 hours ago
add a comment |
I am not quite sure if this should belong here but how do I add public ip to my server?
I wanted to launch a system in Server B live to internet. The problem is no physical connection is linked between my server(Server A) and the Server B.
What I noticed with Server B was:
- the server is using dynamic ip
- the server is located on the other street so cabling is not an option
- it has a default gateway 192.168.0.70.1
- I also noticed that only those PC's connected to the wifi was able to connect to the system.
I have read somewhere that assigning Public IP and Port Forwarding to Server B will probably help me launch that system live to the internet.
The problem is I have little/to no knowledge at networking and every term is like a puzzle to me.
routing port-forwarding
edited 5 hours ago
Community♦
1
asked 15 hours ago
marvin castromarvin castro
141
New contributor
marvin castro is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I am not quite sure if this should belong here but how do I add public ip to my server?
I wanted to launch a system in Server B live to internet. The problem is no physical connection is linked between my server(Server A) and the Server B.
What I noticed with Server B was:
- the server is using dynamic ip
- the server is located on the other street so cabling is not an option
- it has a default gateway 192.168.0.70.1
- I also noticed that only those PC's connected to the wifi was able to connect to the system.
I have read somewhere that assigning Public IP and Port Forwarding to Server B will probably help me launch that system live to the internet.
The problem is I have little/to no knowledge at networking and every term is like a puzzle to me.
routing port-forwarding
routing port-forwarding
edited 5 hours ago
Community♦
1
asked 15 hours ago
marvin castromarvin castro
141
New contributor
marvin castro is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 5 hours ago
Community♦
1
asked 15 hours ago
marvin castromarvin castro
141
New contributor
marvin castro is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 5 hours ago
Community♦
1
edited 5 hours ago
Community♦
1
edited 5 hours ago
Community♦
1
1
asked 15 hours ago
marvin castromarvin castro
141
New contributor
marvin castro is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 15 hours ago
marvin castromarvin castro
141
asked 15 hours ago
marvin castromarvin castro
141
141
New contributor
marvin castro is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
marvin castro is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
marvin castro is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
2
The first step is to ask your ISP to assign you a public IP address if they don’t give you one by default. It might be either static or dynamic (accessible from outside but not guaranteed to be constant). This and many more things will influence further steps (see Mikael’s answer). Unfortunately, this question cannot be answered generally.
– Melebius
10 hours ago
It is also very unclear what the link to Server A is. You just mention it's not linked to Server B, but don't say a word about how is should be interacting with it (if at all). Which makes me think you could even be looking at VPN between A & B, and something like giving external access to Server B from Internet (might be achieved thru port forwarding on some your consumer grade router)
– user1532080
8 hours ago
add a comment |
2
The first step is to ask your ISP to assign you a public IP address if they don’t give you one by default. It might be either static or dynamic (accessible from outside but not guaranteed to be constant). This and many more things will influence further steps (see Mikael’s answer). Unfortunately, this question cannot be answered generally.
– Melebius
10 hours ago
It is also very unclear what the link to Server A is. You just mention it's not linked to Server B, but don't say a word about how is should be interacting with it (if at all). Which makes me think you could even be looking at VPN between A & B, and something like giving external access to Server B from Internet (might be achieved thru port forwarding on some your consumer grade router)
– user1532080
8 hours ago
2
2
The first step is to ask your ISP to assign you a public IP address if they don’t give you one by default. It might be either static or dynamic (accessible from outside but not guaranteed to be constant). This and many more things will influence further steps (see Mikael’s answer). Unfortunately, this question cannot be answered generally.
– Melebius
10 hours ago
The first step is to ask your ISP to assign you a public IP address if they don’t give you one by default. It might be either static or dynamic (accessible from outside but not guaranteed to be constant). This and many more things will influence further steps (see Mikael’s answer). Unfortunately, this question cannot be answered generally.
– Melebius
10 hours ago
It is also very unclear what the link to Server A is. You just mention it's not linked to Server B, but don't say a word about how is should be interacting with it (if at all). Which makes me think you could even be looking at VPN between A & B, and something like giving external access to Server B from Internet (might be achieved thru port forwarding on some your consumer grade router)
– user1532080
8 hours ago
It is also very unclear what the link to Server A is. You just mention it's not linked to Server B, but don't say a word about how is should be interacting with it (if at all). Which makes me think you could even be looking at VPN between A & B, and something like giving external access to Server B from Internet (might be achieved thru port forwarding on some your consumer grade router)
– user1532080
8 hours ago
add a comment |
2 Answers
2
active
oldest
votes
Presenting a service to the Internet definitely should not be done unless you know what you're doing. Fortunately it's mostly a matter of not being naïve, but you definitely should have passed a certain threshold of knowledge before you attempt this.
Assuming you're the single person who will have to manage this solution, here are some concepts with which you should be somewhat familiar before attempting to set up a public server:
- Network firewall concepts and rules.
- IPv4 routing.
- DNS and Dynamic DNS
- Securing Internet traffic using TLS
- TLS Certificates and their management
Tip: Practice these things in a test environment separate from your production environment. If money is an issue, you can "invest" in a test environment as small as a regular home DSL router and a Raspberry Pi, as long as you have access to a public IP.
And since this is supposed to be an Internet facing production service, don't skimp on your training. Nobody will thank you for it.
answered 15 hours ago
Mikael HMikael H
776110
Well I have done all of these things. I am just poor at doing network. I am scared of hitting an IP Address if ever I will set a Public IP
– marvin castro
14 hours ago
2
@marvincastro: "Hitting an IP address"? What does that even mean? If you mean "using an IP address that's already in use by someone else", then Stop.Right.Now. I agree with this answer (+1), you need to understand Internet Technology to a much better level if you want to safely put something on the Internet that won't be hacked in minutes. I'm serious; that is the time it takes to break into an unsecured server on the 'Net.
– MSalters
12 hours ago
@marvincastro: I'm really not a proponent of "easy" answers to this sort of question, because doing these things well does require a small but solid set of knowledge in a number of areas (see my earlier post), and the only good way of achieving that is through reading and practice. It doesn't have to be expensive, but it has to be allowed to take some time.
– Mikael H
11 hours ago
can anyone recommend some resources for these 5 concepts?
– Mike Palmice
8 hours ago
1
@marvincastro: unfortunately, Mikael H is right. I think I understand what you mean by "hitting an IP address", you probably mean using one that is already in use. This would cause absolutely no problem to anyone but you, for the simple reason that things work differently: your ISP would give you an IP. If you try using another, nobody will reach your machine, and the fact you don't understand this shows that you don't have proper knowledge of routing.
– user1532080
8 hours ago
|
show 3 more comments
Do you want to access server b from the environment where server a is located?
If so u can connect the two locations usin simple wireless point to point connection using two radios like ubiqwinti m2.
answered 13 hours ago
Teddy TedTeddy Ted
1
New contributor
Teddy Ted is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "2"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
marvin castro is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f961970%2fset-up-public-ip-on-server%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Presenting a service to the Internet definitely should not be done unless you know what you're doing. Fortunately it's mostly a matter of not being naïve, but you definitely should have passed a certain threshold of knowledge before you attempt this.
Assuming you're the single person who will have to manage this solution, here are some concepts with which you should be somewhat familiar before attempting to set up a public server:
- Network firewall concepts and rules.
- IPv4 routing.
- DNS and Dynamic DNS
- Securing Internet traffic using TLS
- TLS Certificates and their management
Tip: Practice these things in a test environment separate from your production environment. If money is an issue, you can "invest" in a test environment as small as a regular home DSL router and a Raspberry Pi, as long as you have access to a public IP.
And since this is supposed to be an Internet facing production service, don't skimp on your training. Nobody will thank you for it.
answered 15 hours ago
Mikael HMikael H
776110
Well I have done all of these things. I am just poor at doing network. I am scared of hitting an IP Address if ever I will set a Public IP
– marvin castro
14 hours ago
2
@marvincastro: "Hitting an IP address"? What does that even mean? If you mean "using an IP address that's already in use by someone else", then Stop.Right.Now. I agree with this answer (+1), you need to understand Internet Technology to a much better level if you want to safely put something on the Internet that won't be hacked in minutes. I'm serious; that is the time it takes to break into an unsecured server on the 'Net.
– MSalters
12 hours ago
@marvincastro: I'm really not a proponent of "easy" answers to this sort of question, because doing these things well does require a small but solid set of knowledge in a number of areas (see my earlier post), and the only good way of achieving that is through reading and practice. It doesn't have to be expensive, but it has to be allowed to take some time.
– Mikael H
11 hours ago
can anyone recommend some resources for these 5 concepts?
– Mike Palmice
8 hours ago
1
@marvincastro: unfortunately, Mikael H is right. I think I understand what you mean by "hitting an IP address", you probably mean using one that is already in use. This would cause absolutely no problem to anyone but you, for the simple reason that things work differently: your ISP would give you an IP. If you try using another, nobody will reach your machine, and the fact you don't understand this shows that you don't have proper knowledge of routing.
– user1532080
8 hours ago
|
show 3 more comments
Presenting a service to the Internet definitely should not be done unless you know what you're doing. Fortunately it's mostly a matter of not being naïve, but you definitely should have passed a certain threshold of knowledge before you attempt this.
Assuming you're the single person who will have to manage this solution, here are some concepts with which you should be somewhat familiar before attempting to set up a public server:
- Network firewall concepts and rules.
- IPv4 routing.
- DNS and Dynamic DNS
- Securing Internet traffic using TLS
- TLS Certificates and their management
Tip: Practice these things in a test environment separate from your production environment. If money is an issue, you can "invest" in a test environment as small as a regular home DSL router and a Raspberry Pi, as long as you have access to a public IP.
And since this is supposed to be an Internet facing production service, don't skimp on your training. Nobody will thank you for it.
answered 15 hours ago
Mikael HMikael H
776110
Well I have done all of these things. I am just poor at doing network. I am scared of hitting an IP Address if ever I will set a Public IP
– marvin castro
14 hours ago
2
@marvincastro: "Hitting an IP address"? What does that even mean? If you mean "using an IP address that's already in use by someone else", then Stop.Right.Now. I agree with this answer (+1), you need to understand Internet Technology to a much better level if you want to safely put something on the Internet that won't be hacked in minutes. I'm serious; that is the time it takes to break into an unsecured server on the 'Net.
– MSalters
12 hours ago
@marvincastro: I'm really not a proponent of "easy" answers to this sort of question, because doing these things well does require a small but solid set of knowledge in a number of areas (see my earlier post), and the only good way of achieving that is through reading and practice. It doesn't have to be expensive, but it has to be allowed to take some time.
– Mikael H
11 hours ago
can anyone recommend some resources for these 5 concepts?
– Mike Palmice
8 hours ago
1
@marvincastro: unfortunately, Mikael H is right. I think I understand what you mean by "hitting an IP address", you probably mean using one that is already in use. This would cause absolutely no problem to anyone but you, for the simple reason that things work differently: your ISP would give you an IP. If you try using another, nobody will reach your machine, and the fact you don't understand this shows that you don't have proper knowledge of routing.
– user1532080
8 hours ago
|
show 3 more comments
Presenting a service to the Internet definitely should not be done unless you know what you're doing. Fortunately it's mostly a matter of not being naïve, but you definitely should have passed a certain threshold of knowledge before you attempt this.
Assuming you're the single person who will have to manage this solution, here are some concepts with which you should be somewhat familiar before attempting to set up a public server:
- Network firewall concepts and rules.
- IPv4 routing.
- DNS and Dynamic DNS
- Securing Internet traffic using TLS
- TLS Certificates and their management
Tip: Practice these things in a test environment separate from your production environment. If money is an issue, you can "invest" in a test environment as small as a regular home DSL router and a Raspberry Pi, as long as you have access to a public IP.
And since this is supposed to be an Internet facing production service, don't skimp on your training. Nobody will thank you for it.
answered 15 hours ago
Mikael HMikael H
776110
Presenting a service to the Internet definitely should not be done unless you know what you're doing. Fortunately it's mostly a matter of not being naïve, but you definitely should have passed a certain threshold of knowledge before you attempt this.
Assuming you're the single person who will have to manage this solution, here are some concepts with which you should be somewhat familiar before attempting to set up a public server:
- Network firewall concepts and rules.
- IPv4 routing.
- DNS and Dynamic DNS
- Securing Internet traffic using TLS
- TLS Certificates and their management
Tip: Practice these things in a test environment separate from your production environment. If money is an issue, you can "invest" in a test environment as small as a regular home DSL router and a Raspberry Pi, as long as you have access to a public IP.
And since this is supposed to be an Internet facing production service, don't skimp on your training. Nobody will thank you for it.
answered 15 hours ago
Mikael HMikael H
776110
answered 15 hours ago
Mikael HMikael H
776110
answered 15 hours ago
Mikael HMikael H
776110
answered 15 hours ago
Mikael HMikael H
776110
776110
Well I have done all of these things. I am just poor at doing network. I am scared of hitting an IP Address if ever I will set a Public IP
– marvin castro
14 hours ago
2
@marvincastro: "Hitting an IP address"? What does that even mean? If you mean "using an IP address that's already in use by someone else", then Stop.Right.Now. I agree with this answer (+1), you need to understand Internet Technology to a much better level if you want to safely put something on the Internet that won't be hacked in minutes. I'm serious; that is the time it takes to break into an unsecured server on the 'Net.
– MSalters
12 hours ago
@marvincastro: I'm really not a proponent of "easy" answers to this sort of question, because doing these things well does require a small but solid set of knowledge in a number of areas (see my earlier post), and the only good way of achieving that is through reading and practice. It doesn't have to be expensive, but it has to be allowed to take some time.
– Mikael H
11 hours ago
can anyone recommend some resources for these 5 concepts?
– Mike Palmice
8 hours ago
1
@marvincastro: unfortunately, Mikael H is right. I think I understand what you mean by "hitting an IP address", you probably mean using one that is already in use. This would cause absolutely no problem to anyone but you, for the simple reason that things work differently: your ISP would give you an IP. If you try using another, nobody will reach your machine, and the fact you don't understand this shows that you don't have proper knowledge of routing.
– user1532080
8 hours ago
|
show 3 more comments
Well I have done all of these things. I am just poor at doing network. I am scared of hitting an IP Address if ever I will set a Public IP
– marvin castro
14 hours ago
2
@marvincastro: "Hitting an IP address"? What does that even mean? If you mean "using an IP address that's already in use by someone else", then Stop.Right.Now. I agree with this answer (+1), you need to understand Internet Technology to a much better level if you want to safely put something on the Internet that won't be hacked in minutes. I'm serious; that is the time it takes to break into an unsecured server on the 'Net.
– MSalters
12 hours ago
@marvincastro: I'm really not a proponent of "easy" answers to this sort of question, because doing these things well does require a small but solid set of knowledge in a number of areas (see my earlier post), and the only good way of achieving that is through reading and practice. It doesn't have to be expensive, but it has to be allowed to take some time.
– Mikael H
11 hours ago
can anyone recommend some resources for these 5 concepts?
– Mike Palmice
8 hours ago
1
@marvincastro: unfortunately, Mikael H is right. I think I understand what you mean by "hitting an IP address", you probably mean using one that is already in use. This would cause absolutely no problem to anyone but you, for the simple reason that things work differently: your ISP would give you an IP. If you try using another, nobody will reach your machine, and the fact you don't understand this shows that you don't have proper knowledge of routing.
– user1532080
8 hours ago
Well I have done all of these things. I am just poor at doing network. I am scared of hitting an IP Address if ever I will set a Public IP
– marvin castro
14 hours ago
Well I have done all of these things. I am just poor at doing network. I am scared of hitting an IP Address if ever I will set a Public IP
– marvin castro
14 hours ago
2
2
@marvincastro: "Hitting an IP address"? What does that even mean? If you mean "using an IP address that's already in use by someone else", then Stop.Right.Now. I agree with this answer (+1), you need to understand Internet Technology to a much better level if you want to safely put something on the Internet that won't be hacked in minutes. I'm serious; that is the time it takes to break into an unsecured server on the 'Net.
– MSalters
12 hours ago
@marvincastro: "Hitting an IP address"? What does that even mean? If you mean "using an IP address that's already in use by someone else", then Stop.Right.Now. I agree with this answer (+1), you need to understand Internet Technology to a much better level if you want to safely put something on the Internet that won't be hacked in minutes. I'm serious; that is the time it takes to break into an unsecured server on the 'Net.
– MSalters
12 hours ago
@marvincastro: I'm really not a proponent of "easy" answers to this sort of question, because doing these things well does require a small but solid set of knowledge in a number of areas (see my earlier post), and the only good way of achieving that is through reading and practice. It doesn't have to be expensive, but it has to be allowed to take some time.
– Mikael H
11 hours ago
@marvincastro: I'm really not a proponent of "easy" answers to this sort of question, because doing these things well does require a small but solid set of knowledge in a number of areas (see my earlier post), and the only good way of achieving that is through reading and practice. It doesn't have to be expensive, but it has to be allowed to take some time.
– Mikael H
11 hours ago
can anyone recommend some resources for these 5 concepts?
– Mike Palmice
8 hours ago
can anyone recommend some resources for these 5 concepts?
– Mike Palmice
8 hours ago
1
1
@marvincastro: unfortunately, Mikael H is right. I think I understand what you mean by "hitting an IP address", you probably mean using one that is already in use. This would cause absolutely no problem to anyone but you, for the simple reason that things work differently: your ISP would give you an IP. If you try using another, nobody will reach your machine, and the fact you don't understand this shows that you don't have proper knowledge of routing.
– user1532080
8 hours ago
@marvincastro: unfortunately, Mikael H is right. I think I understand what you mean by "hitting an IP address", you probably mean using one that is already in use. This would cause absolutely no problem to anyone but you, for the simple reason that things work differently: your ISP would give you an IP. If you try using another, nobody will reach your machine, and the fact you don't understand this shows that you don't have proper knowledge of routing.
– user1532080
8 hours ago
|
show 3 more comments
Do you want to access server b from the environment where server a is located?
If so u can connect the two locations usin simple wireless point to point connection using two radios like ubiqwinti m2.
answered 13 hours ago
Teddy TedTeddy Ted
1
New contributor
Teddy Ted is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Do you want to access server b from the environment where server a is located?
If so u can connect the two locations usin simple wireless point to point connection using two radios like ubiqwinti m2.
answered 13 hours ago
Teddy TedTeddy Ted
1
New contributor
Teddy Ted is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Do you want to access server b from the environment where server a is located?
If so u can connect the two locations usin simple wireless point to point connection using two radios like ubiqwinti m2.
answered 13 hours ago
Teddy TedTeddy Ted
1
New contributor
Teddy Ted is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Do you want to access server b from the environment where server a is located?
If so u can connect the two locations usin simple wireless point to point connection using two radios like ubiqwinti m2.
answered 13 hours ago
Teddy TedTeddy Ted
1
New contributor
Teddy Ted is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 13 hours ago
Teddy TedTeddy Ted
1
New contributor
Teddy Ted is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 13 hours ago
Teddy TedTeddy Ted
1
answered 13 hours ago
Teddy TedTeddy Ted
1
1
New contributor
Teddy Ted is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Teddy Ted is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Teddy Ted is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
marvin castro is a new contributor. Be nice, and check out our Code of Conduct.
marvin castro is a new contributor. Be nice, and check out our Code of Conduct.
marvin castro is a new contributor. Be nice, and check out our Code of Conduct.
marvin castro is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Server Fault!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f961970%2fset-up-public-ip-on-server%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
The first step is to ask your ISP to assign you a public IP address if they don’t give you one by default. It might be either static or dynamic (accessible from outside but not guaranteed to be constant). This and many more things will influence further steps (see Mikael’s answer). Unfortunately, this question cannot be answered generally.
– Melebius
10 hours ago
It is also very unclear what the link to Server A is. You just mention it's not linked to Server B, but don't say a word about how is should be interacting with it (if at all). Which makes me think you could even be looking at VPN between A & B, and something like giving external access to Server B from Internet (might be achieved thru port forwarding on some your consumer grade router)
– user1532080
8 hours ago