What does the term “railed” mean in signal processing?What is the meaning of a Nyquist diagram in a vibration signalIs step detection the correct approach to this problem? what if not?How to convert the mean and variance of a processed received signal into a SNR or BER?
Is using haveibeenpwned to validate password strength rational?
Find the Factorial From the Given Prime Relationship
Arriving at the same result with the opposite hypotheses
Is the term 'open source' a trademark?
Is it a problem if <h4>, <h5> and <h6> are smaller than regular text?
What is the giant octopus in the torture chamber for?
At what point in time did Dumbledore ask Snape for this favor?
What does the term "railed" mean in signal processing?
How Can I Tell The Difference Between Unmarked Sugar and Stevia?
How do I write "Show, Don't Tell" as a person with Asperger Syndrome?
Chemmacros scheme translation
The eyes have it
Confusion about off peak timings of London trains
Do simulator games use a realistic trajectory to get into orbit?
How would a aircraft visually signal "in distress"?
Should an arbiter claim draw at a K+R vs K+R endgame?
Why would future John risk sending back a T-800 to save his younger self?
What can plausibly explain many of my very long and low-tech bridges?
Words that signal future content
BGP convergence issue
How to build suspense or so to establish and justify xenophobia of characters in the eyes of the reader?
Passing multiple files through stdin (over ssh)
Using a found spellbook as a Sorcerer-Wizard multiclass
How to officially communicate to a non-responsive colleague?
What does the term “railed” mean in signal processing?
What is the meaning of a Nyquist diagram in a vibration signalIs step detection the correct approach to this problem? what if not?How to convert the mean and variance of a processed received signal into a SNR or BER?
$begingroup$
I'm having trouble finding a definition of "railed" that relates to signal processing.
Am I correct in my guess that this term is in fact from this field?
My signal data comes from an EEG device. The lightly documented open source software I'm using doesn't define it, but it shows that term when there is no signal data being displayed.
Is that all it means (no data)? Or does it mean something like the signal being read is too great to be displayed or correctly measured?
signal-analysis
asked 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
I'm having trouble finding a definition of "railed" that relates to signal processing.
Am I correct in my guess that this term is in fact from this field?
My signal data comes from an EEG device. The lightly documented open source software I'm using doesn't define it, but it shows that term when there is no signal data being displayed.
Is that all it means (no data)? Or does it mean something like the signal being read is too great to be displayed or correctly measured?
signal-analysis
asked 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
I'm having trouble finding a definition of "railed" that relates to signal processing.
Am I correct in my guess that this term is in fact from this field?
My signal data comes from an EEG device. The lightly documented open source software I'm using doesn't define it, but it shows that term when there is no signal data being displayed.
Is that all it means (no data)? Or does it mean something like the signal being read is too great to be displayed or correctly measured?
signal-analysis
asked 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
I'm having trouble finding a definition of "railed" that relates to signal processing.
Am I correct in my guess that this term is in fact from this field?
My signal data comes from an EEG device. The lightly documented open source software I'm using doesn't define it, but it shows that term when there is no signal data being displayed.
Is that all it means (no data)? Or does it mean something like the signal being read is too great to be displayed or correctly measured?
signal-analysis
signal-analysis
asked 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 9 hours ago
Hack-RHack-R
1185
asked 9 hours ago
Hack-RHack-R
1185
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
3 Answers
3
active
oldest
votes
$begingroup$
A railed signal, or a railing signal, seems to indicate a flatline. On BIOPAC, Railing signal (flatline) says:
When the amplified signal for any given channel exceeds the range -10
to +10 volts, the signal will rail. You will see a straight line at
-10 or + 10 volts (more likely the reading will be close 9.99 volts). The MP system is designed to work only in the range -10 to +10 volts.
The signal could rail for several reasons (which are not exclusive)...
From Amplifiers: What do rail-to-rail and single supply mean?
With respect to analog signals, a “rail” is a boundary that a signal
has to work within.
answered 9 hours ago
Laurent DuvalLaurent Duval
17k32163
$endgroup$
1
$begingroup$
Good, You'll find some reasons at the end of the link I gave. I'll upvote the other answers
$endgroup$
– Laurent Duval
8 hours ago
add a comment |
$begingroup$
Just a guess.
From analog electronics, amplifiers typically have a DC voltage that supplies power to the circuit. The amplified output is typically limited to that voltage. When an output is clipped, it has been said that the output is at the rails.
Not really a dsp term but is a way to say that a waveform is clipped via the dynamic range of the system.
answered 9 hours ago
Stanley PawlukiewiczStanley Pawlukiewicz
6,7112623
$endgroup$
$begingroup$
Thank you! This sounds accurate and matches the other info that was also just posted by Laurent then myself. :)
$endgroup$
– Hack-R
9 hours ago
add a comment |
$begingroup$
The answer given by @LaurentDuval is correct. I just wanted to also post the explanation I found in an ancient forum post right before reading his answer:
[Signal processing software] shows "Railed" when microvolt magnitudes for the channels are off the top end of the scale. In other words, generally it means
something wrong with the differential voltage measured between the
channel and the reference. Either one could have a poor connection
leading to "Railed".
One way to check consistency is to connect all three leads together, SRB2, Bias, and the channel(s) you are trying to measure.
You can do this with a glob of Ten20 paste or alligator clips. Once
you have all leads connected, that should produce 0 microvolts, or
close to it.
answered 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "295"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Hack-R is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdsp.stackexchange.com%2fquestions%2f58672%2fwhat-does-the-term-railed-mean-in-signal-processing%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
A railed signal, or a railing signal, seems to indicate a flatline. On BIOPAC, Railing signal (flatline) says:
When the amplified signal for any given channel exceeds the range -10
to +10 volts, the signal will rail. You will see a straight line at
-10 or + 10 volts (more likely the reading will be close 9.99 volts). The MP system is designed to work only in the range -10 to +10 volts.
The signal could rail for several reasons (which are not exclusive)...
From Amplifiers: What do rail-to-rail and single supply mean?
With respect to analog signals, a “rail” is a boundary that a signal
has to work within.
answered 9 hours ago
Laurent DuvalLaurent Duval
17k32163
$endgroup$
1
$begingroup$
Good, You'll find some reasons at the end of the link I gave. I'll upvote the other answers
$endgroup$
– Laurent Duval
8 hours ago
add a comment |
$begingroup$
A railed signal, or a railing signal, seems to indicate a flatline. On BIOPAC, Railing signal (flatline) says:
When the amplified signal for any given channel exceeds the range -10
to +10 volts, the signal will rail. You will see a straight line at
-10 or + 10 volts (more likely the reading will be close 9.99 volts). The MP system is designed to work only in the range -10 to +10 volts.
The signal could rail for several reasons (which are not exclusive)...
From Amplifiers: What do rail-to-rail and single supply mean?
With respect to analog signals, a “rail” is a boundary that a signal
has to work within.
answered 9 hours ago
Laurent DuvalLaurent Duval
17k32163
$endgroup$
1
$begingroup$
Good, You'll find some reasons at the end of the link I gave. I'll upvote the other answers
$endgroup$
– Laurent Duval
8 hours ago
add a comment |
$begingroup$
A railed signal, or a railing signal, seems to indicate a flatline. On BIOPAC, Railing signal (flatline) says:
When the amplified signal for any given channel exceeds the range -10
to +10 volts, the signal will rail. You will see a straight line at
-10 or + 10 volts (more likely the reading will be close 9.99 volts). The MP system is designed to work only in the range -10 to +10 volts.
The signal could rail for several reasons (which are not exclusive)...
From Amplifiers: What do rail-to-rail and single supply mean?
With respect to analog signals, a “rail” is a boundary that a signal
has to work within.
answered 9 hours ago
Laurent DuvalLaurent Duval
17k32163
$endgroup$
A railed signal, or a railing signal, seems to indicate a flatline. On BIOPAC, Railing signal (flatline) says:
When the amplified signal for any given channel exceeds the range -10
to +10 volts, the signal will rail. You will see a straight line at
-10 or + 10 volts (more likely the reading will be close 9.99 volts). The MP system is designed to work only in the range -10 to +10 volts.
The signal could rail for several reasons (which are not exclusive)...
From Amplifiers: What do rail-to-rail and single supply mean?
With respect to analog signals, a “rail” is a boundary that a signal
has to work within.
answered 9 hours ago
Laurent DuvalLaurent Duval
17k32163
edited 8 hours ago
answered 9 hours ago
Laurent DuvalLaurent Duval
17k32163
answered 9 hours ago
Laurent DuvalLaurent Duval
17k32163
answered 9 hours ago
Laurent DuvalLaurent Duval
17k32163
17k32163
1
$begingroup$
Good, You'll find some reasons at the end of the link I gave. I'll upvote the other answers
$endgroup$
– Laurent Duval
8 hours ago
add a comment |
1
$begingroup$
Good, You'll find some reasons at the end of the link I gave. I'll upvote the other answers
$endgroup$
– Laurent Duval
8 hours ago
1
1
$begingroup$
Good, You'll find some reasons at the end of the link I gave. I'll upvote the other answers
$endgroup$
– Laurent Duval
8 hours ago
$begingroup$
Good, You'll find some reasons at the end of the link I gave. I'll upvote the other answers
$endgroup$
– Laurent Duval
8 hours ago
add a comment |
$begingroup$
Just a guess.
From analog electronics, amplifiers typically have a DC voltage that supplies power to the circuit. The amplified output is typically limited to that voltage. When an output is clipped, it has been said that the output is at the rails.
Not really a dsp term but is a way to say that a waveform is clipped via the dynamic range of the system.
answered 9 hours ago
Stanley PawlukiewiczStanley Pawlukiewicz
6,7112623
$endgroup$
$begingroup$
Thank you! This sounds accurate and matches the other info that was also just posted by Laurent then myself. :)
$endgroup$
– Hack-R
9 hours ago
add a comment |
$begingroup$
Just a guess.
From analog electronics, amplifiers typically have a DC voltage that supplies power to the circuit. The amplified output is typically limited to that voltage. When an output is clipped, it has been said that the output is at the rails.
Not really a dsp term but is a way to say that a waveform is clipped via the dynamic range of the system.
answered 9 hours ago
Stanley PawlukiewiczStanley Pawlukiewicz
6,7112623
$endgroup$
$begingroup$
Thank you! This sounds accurate and matches the other info that was also just posted by Laurent then myself. :)
$endgroup$
– Hack-R
9 hours ago
add a comment |
$begingroup$
Just a guess.
From analog electronics, amplifiers typically have a DC voltage that supplies power to the circuit. The amplified output is typically limited to that voltage. When an output is clipped, it has been said that the output is at the rails.
Not really a dsp term but is a way to say that a waveform is clipped via the dynamic range of the system.
answered 9 hours ago
Stanley PawlukiewiczStanley Pawlukiewicz
6,7112623
$endgroup$
Just a guess.
From analog electronics, amplifiers typically have a DC voltage that supplies power to the circuit. The amplified output is typically limited to that voltage. When an output is clipped, it has been said that the output is at the rails.
Not really a dsp term but is a way to say that a waveform is clipped via the dynamic range of the system.
answered 9 hours ago
Stanley PawlukiewiczStanley Pawlukiewicz
6,7112623
answered 9 hours ago
Stanley PawlukiewiczStanley Pawlukiewicz
6,7112623
answered 9 hours ago
Stanley PawlukiewiczStanley Pawlukiewicz
6,7112623
answered 9 hours ago
Stanley PawlukiewiczStanley Pawlukiewicz
6,7112623
6,7112623
$begingroup$
Thank you! This sounds accurate and matches the other info that was also just posted by Laurent then myself. :)
$endgroup$
– Hack-R
9 hours ago
add a comment |
$begingroup$
Thank you! This sounds accurate and matches the other info that was also just posted by Laurent then myself. :)
$endgroup$
– Hack-R
9 hours ago
$begingroup$
Thank you! This sounds accurate and matches the other info that was also just posted by Laurent then myself. :)
$endgroup$
– Hack-R
9 hours ago
$begingroup$
Thank you! This sounds accurate and matches the other info that was also just posted by Laurent then myself. :)
$endgroup$
– Hack-R
9 hours ago
add a comment |
$begingroup$
The answer given by @LaurentDuval is correct. I just wanted to also post the explanation I found in an ancient forum post right before reading his answer:
[Signal processing software] shows "Railed" when microvolt magnitudes for the channels are off the top end of the scale. In other words, generally it means
something wrong with the differential voltage measured between the
channel and the reference. Either one could have a poor connection
leading to "Railed".
One way to check consistency is to connect all three leads together, SRB2, Bias, and the channel(s) you are trying to measure.
You can do this with a glob of Ten20 paste or alligator clips. Once
you have all leads connected, that should produce 0 microvolts, or
close to it.
answered 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
The answer given by @LaurentDuval is correct. I just wanted to also post the explanation I found in an ancient forum post right before reading his answer:
[Signal processing software] shows "Railed" when microvolt magnitudes for the channels are off the top end of the scale. In other words, generally it means
something wrong with the differential voltage measured between the
channel and the reference. Either one could have a poor connection
leading to "Railed".
One way to check consistency is to connect all three leads together, SRB2, Bias, and the channel(s) you are trying to measure.
You can do this with a glob of Ten20 paste or alligator clips. Once
you have all leads connected, that should produce 0 microvolts, or
close to it.
answered 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
The answer given by @LaurentDuval is correct. I just wanted to also post the explanation I found in an ancient forum post right before reading his answer:
[Signal processing software] shows "Railed" when microvolt magnitudes for the channels are off the top end of the scale. In other words, generally it means
something wrong with the differential voltage measured between the
channel and the reference. Either one could have a poor connection
leading to "Railed".
One way to check consistency is to connect all three leads together, SRB2, Bias, and the channel(s) you are trying to measure.
You can do this with a glob of Ten20 paste or alligator clips. Once
you have all leads connected, that should produce 0 microvolts, or
close to it.
answered 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
The answer given by @LaurentDuval is correct. I just wanted to also post the explanation I found in an ancient forum post right before reading his answer:
[Signal processing software] shows "Railed" when microvolt magnitudes for the channels are off the top end of the scale. In other words, generally it means
something wrong with the differential voltage measured between the
channel and the reference. Either one could have a poor connection
leading to "Railed".
One way to check consistency is to connect all three leads together, SRB2, Bias, and the channel(s) you are trying to measure.
You can do this with a glob of Ten20 paste or alligator clips. Once
you have all leads connected, that should produce 0 microvolts, or
close to it.
answered 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 9 hours ago
Hack-RHack-R
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 9 hours ago
Hack-RHack-R
1185
answered 9 hours ago
Hack-RHack-R
1185
1185
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Hack-R is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
Hack-R is a new contributor. Be nice, and check out our Code of Conduct.
Hack-R is a new contributor. Be nice, and check out our Code of Conduct.
Hack-R is a new contributor. Be nice, and check out our Code of Conduct.
Hack-R is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Signal Processing Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdsp.stackexchange.com%2fquestions%2f58672%2fwhat-does-the-term-railed-mean-in-signal-processing%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
