Stopping real property loss from eroding embankment Planned maintenance scheduled April 17/18, 2019 at 00:00UTC (8:00pm US/Eastern) Announcing the arrival of Valued Associate #679: Cesar Manara Unicorn Meta Zoo #1: Why another podcast?How can I tell if stains are caused by a ceiling that is drying out, or if there is still a leak?Where could the water be coming from found in this hole my dogs dug?Information resources for Traditional Japanese HomesOn demand water heater flow lossHigh Water Bill - No LeaksToilet water valve tightened to OFF position but water keeps filling up tanklatent heat loss of water in pipeShower problem: Can't turn off hot waterOverkill from my Structural Engineer, can you check his drawings?Big vertical crack in brick wall and loose bricks

Stars Make Stars

How to say that you spent the night with someone, you were only sleeping and nothing else?

Writing Thesis: Copying from published papers

Notation for two qubit composite product state

What is the largest species of polychaete?

Need a suitable toxic chemical for a murder plot in my novel

Mortgage adviser recommends a longer term than necessary combined with overpayments

Problem when applying foreach loop

Cold is to Refrigerator as warm is to?

What's the point in a preamp?

Windows 10: How to Lock (not sleep) laptop on lid close?

What do I do if technical issues prevent me from filing my return on time?

Autumning in love

Biased dice probability question

How to stop my camera from exagerrating differences in skin colour?

How is simplicity better than precision and clarity in prose?

How do I automatically answer y in bash script?

Jazz greats knew nothing of modes. Why are they used to improvise on standards?

Replacing HDD with SSD; what about non-APFS/APFS?

What do you call a plan that's an alternative plan in case your initial plan fails?

How can I make names more distinctive without making them longer?

Can I throw a longsword at someone?

Stop battery usage [Ubuntu 18]

Blender game recording at the wrong time



Stopping real property loss from eroding embankment



Planned maintenance scheduled April 17/18, 2019 at 00:00UTC (8:00pm US/Eastern)
Announcing the arrival of Valued Associate #679: Cesar Manara
Unicorn Meta Zoo #1: Why another podcast?How can I tell if stains are caused by a ceiling that is drying out, or if there is still a leak?Where could the water be coming from found in this hole my dogs dug?Information resources for Traditional Japanese HomesOn demand water heater flow lossHigh Water Bill - No LeaksToilet water valve tightened to OFF position but water keeps filling up tanklatent heat loss of water in pipeShower problem: Can't turn off hot waterOverkill from my Structural Engineer, can you check his drawings?Big vertical crack in brick wall and loose bricks



.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty margin-bottom:0;








2















Behind my house there is a very steep bank/slope that leads down to a decent-sized, slow moving creek about 10 - 12 ft wide. Unfortunately it meanders right behind my property at the base of this steep embankment:



enter image description here



When we bought our house almost ten years ago, it had not meandered nearly as much and we had significantly more embankment/real estate than we do now. Over the last decade the creek has cut deeper and deeper into the embankment and we now have lost about 8 - 10 feet of property at the top of the slope due to erosion of the embankment. We are now about to lose our fence which runs along the top of the embankment and I think this is finally the year that I need to do something to stop the erosion of loss of real estate (and our fence).



One thought I had was to see if I could (as impossible as it sounds) redirect the creek to flow straight rather than to meander. This would prevent the creek from cutting into the embankment any further. But it wouldn't stop erosion from rain which is now just as much a problem as the creek.



To fix the erosion issue, I'm wondering if there is any material I could apply/spray/whatever to the entire embankment? I know on the side of highways I often see rocky cliffs with some kind of retaining netting that helps "pack" in the rocks and loose debris from falling onto the road.



At this stage I'm just looking to review my options so I can weigh them and only then drill down into their logistics so I can figure out which way we're going to go.



So, options-wise, what are some solutions out there that could help with both problems (that is: preventing the creek from meandering any further, and erosion of the embankment due to the creek and rainfall)?










share|improve this question






















  • Is the other side of the creek your property as well?

    – UnhandledExcepSean
    2 hours ago











  • I'm really interesting in knowing how you decided to solve this. Please keep us in touch! I also wonder how your local government will allow you to handle this or if you bother notifying them at all.

    – Sickest
    6 mins ago


















2















Behind my house there is a very steep bank/slope that leads down to a decent-sized, slow moving creek about 10 - 12 ft wide. Unfortunately it meanders right behind my property at the base of this steep embankment:



enter image description here



When we bought our house almost ten years ago, it had not meandered nearly as much and we had significantly more embankment/real estate than we do now. Over the last decade the creek has cut deeper and deeper into the embankment and we now have lost about 8 - 10 feet of property at the top of the slope due to erosion of the embankment. We are now about to lose our fence which runs along the top of the embankment and I think this is finally the year that I need to do something to stop the erosion of loss of real estate (and our fence).



One thought I had was to see if I could (as impossible as it sounds) redirect the creek to flow straight rather than to meander. This would prevent the creek from cutting into the embankment any further. But it wouldn't stop erosion from rain which is now just as much a problem as the creek.



To fix the erosion issue, I'm wondering if there is any material I could apply/spray/whatever to the entire embankment? I know on the side of highways I often see rocky cliffs with some kind of retaining netting that helps "pack" in the rocks and loose debris from falling onto the road.



At this stage I'm just looking to review my options so I can weigh them and only then drill down into their logistics so I can figure out which way we're going to go.



So, options-wise, what are some solutions out there that could help with both problems (that is: preventing the creek from meandering any further, and erosion of the embankment due to the creek and rainfall)?










share|improve this question






















  • Is the other side of the creek your property as well?

    – UnhandledExcepSean
    2 hours ago











  • I'm really interesting in knowing how you decided to solve this. Please keep us in touch! I also wonder how your local government will allow you to handle this or if you bother notifying them at all.

    – Sickest
    6 mins ago














2












2








2


1






Behind my house there is a very steep bank/slope that leads down to a decent-sized, slow moving creek about 10 - 12 ft wide. Unfortunately it meanders right behind my property at the base of this steep embankment:



enter image description here



When we bought our house almost ten years ago, it had not meandered nearly as much and we had significantly more embankment/real estate than we do now. Over the last decade the creek has cut deeper and deeper into the embankment and we now have lost about 8 - 10 feet of property at the top of the slope due to erosion of the embankment. We are now about to lose our fence which runs along the top of the embankment and I think this is finally the year that I need to do something to stop the erosion of loss of real estate (and our fence).



One thought I had was to see if I could (as impossible as it sounds) redirect the creek to flow straight rather than to meander. This would prevent the creek from cutting into the embankment any further. But it wouldn't stop erosion from rain which is now just as much a problem as the creek.



To fix the erosion issue, I'm wondering if there is any material I could apply/spray/whatever to the entire embankment? I know on the side of highways I often see rocky cliffs with some kind of retaining netting that helps "pack" in the rocks and loose debris from falling onto the road.



At this stage I'm just looking to review my options so I can weigh them and only then drill down into their logistics so I can figure out which way we're going to go.



So, options-wise, what are some solutions out there that could help with both problems (that is: preventing the creek from meandering any further, and erosion of the embankment due to the creek and rainfall)?










share|improve this question














Behind my house there is a very steep bank/slope that leads down to a decent-sized, slow moving creek about 10 - 12 ft wide. Unfortunately it meanders right behind my property at the base of this steep embankment:



enter image description here



When we bought our house almost ten years ago, it had not meandered nearly as much and we had significantly more embankment/real estate than we do now. Over the last decade the creek has cut deeper and deeper into the embankment and we now have lost about 8 - 10 feet of property at the top of the slope due to erosion of the embankment. We are now about to lose our fence which runs along the top of the embankment and I think this is finally the year that I need to do something to stop the erosion of loss of real estate (and our fence).



One thought I had was to see if I could (as impossible as it sounds) redirect the creek to flow straight rather than to meander. This would prevent the creek from cutting into the embankment any further. But it wouldn't stop erosion from rain which is now just as much a problem as the creek.



To fix the erosion issue, I'm wondering if there is any material I could apply/spray/whatever to the entire embankment? I know on the side of highways I often see rocky cliffs with some kind of retaining netting that helps "pack" in the rocks and loose debris from falling onto the road.



At this stage I'm just looking to review my options so I can weigh them and only then drill down into their logistics so I can figure out which way we're going to go.



So, options-wise, what are some solutions out there that could help with both problems (that is: preventing the creek from meandering any further, and erosion of the embankment due to the creek and rainfall)?







water structural engineering






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked 2 hours ago









hotmeatballsouphotmeatballsoup

1153




1153












  • Is the other side of the creek your property as well?

    – UnhandledExcepSean
    2 hours ago











  • I'm really interesting in knowing how you decided to solve this. Please keep us in touch! I also wonder how your local government will allow you to handle this or if you bother notifying them at all.

    – Sickest
    6 mins ago


















  • Is the other side of the creek your property as well?

    – UnhandledExcepSean
    2 hours ago











  • I'm really interesting in knowing how you decided to solve this. Please keep us in touch! I also wonder how your local government will allow you to handle this or if you bother notifying them at all.

    – Sickest
    6 mins ago

















Is the other side of the creek your property as well?

– UnhandledExcepSean
2 hours ago





Is the other side of the creek your property as well?

– UnhandledExcepSean
2 hours ago













I'm really interesting in knowing how you decided to solve this. Please keep us in touch! I also wonder how your local government will allow you to handle this or if you bother notifying them at all.

– Sickest
6 mins ago






I'm really interesting in knowing how you decided to solve this. Please keep us in touch! I also wonder how your local government will allow you to handle this or if you bother notifying them at all.

– Sickest
6 mins ago











3 Answers
3






active

oldest

votes


















2














This is often a complex legal situation due to regulations that affect (in many parts of the world) what you can do in or near a body or stream of water even if the land next to it or around it belongs to you; not to mention the fact that you are fighting with a force that has literally shaped the planet, and it's inexorable and quite capable of undoing many things you try to do to stop it, if, in fact, it is even legal for you to try to do those things. If the stream also is a property BOUNDARY, the legal implications of trying to move it get even more complex.



The "wire mesh" you describe is most probably gabions, which are empty wire cages which are stacked and filled (pretty much by hand, which has taken a novice contractor or two by surprise, to their cost) with rocks. Another common technique is "rip rap" which are simply large rocks layed over the face.



Your only legal option in many places would be to think about moving your fence back before it's undermined. Trying to get plant material established on the eroding slope is another approach, but many jurisdictions are less fond of people planting highly invasive species often selected in the past for that purpose, so you may need to stick with native/local species. Or, you may be able to perform some work after having hearings/meetings with the Authority Having Jurisdition over such activities in your area (conservation commission, department of environmental protection, etc.)






share|improve this answer
































    2














    Been there , done that; my creek ( Plum Creek, Highland IN) was 30ft. width and embankment was 40 ft. high. I "coated" it with railroad ties, bricks, and many cuttings of trees and bushes. To reach my height I used 3 tiers of RR ties with slopes between. It required a lot of stuff and work. Yours looks much more manageable. Look for affordable rip-rap ;aka brick, cinder block, broken concrete, large size gravel, etc, to break the current . I used reject bricks from a nearby factory that sold them very cheap. For my larger project I used 24 yards/ about 48 tons. I suggest the mesh you have seen on highways and hold it in place with your rip-rap. Then stick a bunch of cuttings of trees that grow well in your location , early spring will work best . Then throw out a bunch ( 50 #) of seed like annual rye grass ( best in the fall ). If you like gardening it could be a great hobby area. Depending on how fast and high the stream gets ; two rows of railroad ties near the waterline will give you about 16" of "seawall". Depending on your budget , there are many options available for seawalls. If rainwater is eroding gullies ;they can be slowed with grass sod, but sod will need some sunlight.






    share|improve this answer























    • you might want to think twice about railroad ties until you hear what the local waterways board, DEQ and envoronmental folks say about that. Creosote is considered hazardous by many. Concrete railroad ties, on the other hand, are a drug on the market and awesome for this but heavy beyond reason.

      – Harper
      25 mins ago


















    1














    What I’ve seen commonly done is either large rocks or large chunks of concrete dumped to protect the area eroding.



    You say it is slow moving, so I’m betting the erosion primarily happens during/after rains causing high, fast moving water. I think you’ll want pretty large rocks/concrete at the base (like maybe 2.5’ or 3’). If you own the other side, you can help straighten that section out by excavating that area.






    share|improve this answer























      Your Answer








      StackExchange.ready(function()
      var channelOptions =
      tags: "".split(" "),
      id: "73"
      ;
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function()
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled)
      StackExchange.using("snippets", function()
      createEditor();
      );

      else
      createEditor();

      );

      function createEditor()
      StackExchange.prepareEditor(
      heartbeatType: 'answer',
      autoActivateHeartbeat: false,
      convertImagesToLinks: false,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: null,
      bindNavPrevention: true,
      postfix: "",
      imageUploader:
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      ,
      noCode: true, onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      );



      );













      draft saved

      draft discarded


















      StackExchange.ready(
      function ()
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f162114%2fstopping-real-property-loss-from-eroding-embankment%23new-answer', 'question_page');

      );

      Post as a guest















      Required, but never shown

























      3 Answers
      3






      active

      oldest

      votes








      3 Answers
      3






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes









      2














      This is often a complex legal situation due to regulations that affect (in many parts of the world) what you can do in or near a body or stream of water even if the land next to it or around it belongs to you; not to mention the fact that you are fighting with a force that has literally shaped the planet, and it's inexorable and quite capable of undoing many things you try to do to stop it, if, in fact, it is even legal for you to try to do those things. If the stream also is a property BOUNDARY, the legal implications of trying to move it get even more complex.



      The "wire mesh" you describe is most probably gabions, which are empty wire cages which are stacked and filled (pretty much by hand, which has taken a novice contractor or two by surprise, to their cost) with rocks. Another common technique is "rip rap" which are simply large rocks layed over the face.



      Your only legal option in many places would be to think about moving your fence back before it's undermined. Trying to get plant material established on the eroding slope is another approach, but many jurisdictions are less fond of people planting highly invasive species often selected in the past for that purpose, so you may need to stick with native/local species. Or, you may be able to perform some work after having hearings/meetings with the Authority Having Jurisdition over such activities in your area (conservation commission, department of environmental protection, etc.)






      share|improve this answer





























        2














        This is often a complex legal situation due to regulations that affect (in many parts of the world) what you can do in or near a body or stream of water even if the land next to it or around it belongs to you; not to mention the fact that you are fighting with a force that has literally shaped the planet, and it's inexorable and quite capable of undoing many things you try to do to stop it, if, in fact, it is even legal for you to try to do those things. If the stream also is a property BOUNDARY, the legal implications of trying to move it get even more complex.



        The "wire mesh" you describe is most probably gabions, which are empty wire cages which are stacked and filled (pretty much by hand, which has taken a novice contractor or two by surprise, to their cost) with rocks. Another common technique is "rip rap" which are simply large rocks layed over the face.



        Your only legal option in many places would be to think about moving your fence back before it's undermined. Trying to get plant material established on the eroding slope is another approach, but many jurisdictions are less fond of people planting highly invasive species often selected in the past for that purpose, so you may need to stick with native/local species. Or, you may be able to perform some work after having hearings/meetings with the Authority Having Jurisdition over such activities in your area (conservation commission, department of environmental protection, etc.)






        share|improve this answer



























          2












          2








          2







          This is often a complex legal situation due to regulations that affect (in many parts of the world) what you can do in or near a body or stream of water even if the land next to it or around it belongs to you; not to mention the fact that you are fighting with a force that has literally shaped the planet, and it's inexorable and quite capable of undoing many things you try to do to stop it, if, in fact, it is even legal for you to try to do those things. If the stream also is a property BOUNDARY, the legal implications of trying to move it get even more complex.



          The "wire mesh" you describe is most probably gabions, which are empty wire cages which are stacked and filled (pretty much by hand, which has taken a novice contractor or two by surprise, to their cost) with rocks. Another common technique is "rip rap" which are simply large rocks layed over the face.



          Your only legal option in many places would be to think about moving your fence back before it's undermined. Trying to get plant material established on the eroding slope is another approach, but many jurisdictions are less fond of people planting highly invasive species often selected in the past for that purpose, so you may need to stick with native/local species. Or, you may be able to perform some work after having hearings/meetings with the Authority Having Jurisdition over such activities in your area (conservation commission, department of environmental protection, etc.)






          share|improve this answer















          This is often a complex legal situation due to regulations that affect (in many parts of the world) what you can do in or near a body or stream of water even if the land next to it or around it belongs to you; not to mention the fact that you are fighting with a force that has literally shaped the planet, and it's inexorable and quite capable of undoing many things you try to do to stop it, if, in fact, it is even legal for you to try to do those things. If the stream also is a property BOUNDARY, the legal implications of trying to move it get even more complex.



          The "wire mesh" you describe is most probably gabions, which are empty wire cages which are stacked and filled (pretty much by hand, which has taken a novice contractor or two by surprise, to their cost) with rocks. Another common technique is "rip rap" which are simply large rocks layed over the face.



          Your only legal option in many places would be to think about moving your fence back before it's undermined. Trying to get plant material established on the eroding slope is another approach, but many jurisdictions are less fond of people planting highly invasive species often selected in the past for that purpose, so you may need to stick with native/local species. Or, you may be able to perform some work after having hearings/meetings with the Authority Having Jurisdition over such activities in your area (conservation commission, department of environmental protection, etc.)







          share|improve this answer














          share|improve this answer



          share|improve this answer








          edited 1 hour ago

























          answered 1 hour ago









          EcnerwalEcnerwal

          55.4k23991




          55.4k23991























              2














              Been there , done that; my creek ( Plum Creek, Highland IN) was 30ft. width and embankment was 40 ft. high. I "coated" it with railroad ties, bricks, and many cuttings of trees and bushes. To reach my height I used 3 tiers of RR ties with slopes between. It required a lot of stuff and work. Yours looks much more manageable. Look for affordable rip-rap ;aka brick, cinder block, broken concrete, large size gravel, etc, to break the current . I used reject bricks from a nearby factory that sold them very cheap. For my larger project I used 24 yards/ about 48 tons. I suggest the mesh you have seen on highways and hold it in place with your rip-rap. Then stick a bunch of cuttings of trees that grow well in your location , early spring will work best . Then throw out a bunch ( 50 #) of seed like annual rye grass ( best in the fall ). If you like gardening it could be a great hobby area. Depending on how fast and high the stream gets ; two rows of railroad ties near the waterline will give you about 16" of "seawall". Depending on your budget , there are many options available for seawalls. If rainwater is eroding gullies ;they can be slowed with grass sod, but sod will need some sunlight.






              share|improve this answer























              • you might want to think twice about railroad ties until you hear what the local waterways board, DEQ and envoronmental folks say about that. Creosote is considered hazardous by many. Concrete railroad ties, on the other hand, are a drug on the market and awesome for this but heavy beyond reason.

                – Harper
                25 mins ago















              2














              Been there , done that; my creek ( Plum Creek, Highland IN) was 30ft. width and embankment was 40 ft. high. I "coated" it with railroad ties, bricks, and many cuttings of trees and bushes. To reach my height I used 3 tiers of RR ties with slopes between. It required a lot of stuff and work. Yours looks much more manageable. Look for affordable rip-rap ;aka brick, cinder block, broken concrete, large size gravel, etc, to break the current . I used reject bricks from a nearby factory that sold them very cheap. For my larger project I used 24 yards/ about 48 tons. I suggest the mesh you have seen on highways and hold it in place with your rip-rap. Then stick a bunch of cuttings of trees that grow well in your location , early spring will work best . Then throw out a bunch ( 50 #) of seed like annual rye grass ( best in the fall ). If you like gardening it could be a great hobby area. Depending on how fast and high the stream gets ; two rows of railroad ties near the waterline will give you about 16" of "seawall". Depending on your budget , there are many options available for seawalls. If rainwater is eroding gullies ;they can be slowed with grass sod, but sod will need some sunlight.






              share|improve this answer























              • you might want to think twice about railroad ties until you hear what the local waterways board, DEQ and envoronmental folks say about that. Creosote is considered hazardous by many. Concrete railroad ties, on the other hand, are a drug on the market and awesome for this but heavy beyond reason.

                – Harper
                25 mins ago













              2












              2








              2







              Been there , done that; my creek ( Plum Creek, Highland IN) was 30ft. width and embankment was 40 ft. high. I "coated" it with railroad ties, bricks, and many cuttings of trees and bushes. To reach my height I used 3 tiers of RR ties with slopes between. It required a lot of stuff and work. Yours looks much more manageable. Look for affordable rip-rap ;aka brick, cinder block, broken concrete, large size gravel, etc, to break the current . I used reject bricks from a nearby factory that sold them very cheap. For my larger project I used 24 yards/ about 48 tons. I suggest the mesh you have seen on highways and hold it in place with your rip-rap. Then stick a bunch of cuttings of trees that grow well in your location , early spring will work best . Then throw out a bunch ( 50 #) of seed like annual rye grass ( best in the fall ). If you like gardening it could be a great hobby area. Depending on how fast and high the stream gets ; two rows of railroad ties near the waterline will give you about 16" of "seawall". Depending on your budget , there are many options available for seawalls. If rainwater is eroding gullies ;they can be slowed with grass sod, but sod will need some sunlight.






              share|improve this answer













              Been there , done that; my creek ( Plum Creek, Highland IN) was 30ft. width and embankment was 40 ft. high. I "coated" it with railroad ties, bricks, and many cuttings of trees and bushes. To reach my height I used 3 tiers of RR ties with slopes between. It required a lot of stuff and work. Yours looks much more manageable. Look for affordable rip-rap ;aka brick, cinder block, broken concrete, large size gravel, etc, to break the current . I used reject bricks from a nearby factory that sold them very cheap. For my larger project I used 24 yards/ about 48 tons. I suggest the mesh you have seen on highways and hold it in place with your rip-rap. Then stick a bunch of cuttings of trees that grow well in your location , early spring will work best . Then throw out a bunch ( 50 #) of seed like annual rye grass ( best in the fall ). If you like gardening it could be a great hobby area. Depending on how fast and high the stream gets ; two rows of railroad ties near the waterline will give you about 16" of "seawall". Depending on your budget , there are many options available for seawalls. If rainwater is eroding gullies ;they can be slowed with grass sod, but sod will need some sunlight.







              share|improve this answer












              share|improve this answer



              share|improve this answer










              answered 1 hour ago









              blacksmith37blacksmith37

              1,55828




              1,55828












              • you might want to think twice about railroad ties until you hear what the local waterways board, DEQ and envoronmental folks say about that. Creosote is considered hazardous by many. Concrete railroad ties, on the other hand, are a drug on the market and awesome for this but heavy beyond reason.

                – Harper
                25 mins ago

















              • you might want to think twice about railroad ties until you hear what the local waterways board, DEQ and envoronmental folks say about that. Creosote is considered hazardous by many. Concrete railroad ties, on the other hand, are a drug on the market and awesome for this but heavy beyond reason.

                – Harper
                25 mins ago
















              you might want to think twice about railroad ties until you hear what the local waterways board, DEQ and envoronmental folks say about that. Creosote is considered hazardous by many. Concrete railroad ties, on the other hand, are a drug on the market and awesome for this but heavy beyond reason.

              – Harper
              25 mins ago





              you might want to think twice about railroad ties until you hear what the local waterways board, DEQ and envoronmental folks say about that. Creosote is considered hazardous by many. Concrete railroad ties, on the other hand, are a drug on the market and awesome for this but heavy beyond reason.

              – Harper
              25 mins ago











              1














              What I’ve seen commonly done is either large rocks or large chunks of concrete dumped to protect the area eroding.



              You say it is slow moving, so I’m betting the erosion primarily happens during/after rains causing high, fast moving water. I think you’ll want pretty large rocks/concrete at the base (like maybe 2.5’ or 3’). If you own the other side, you can help straighten that section out by excavating that area.






              share|improve this answer



























                1














                What I’ve seen commonly done is either large rocks or large chunks of concrete dumped to protect the area eroding.



                You say it is slow moving, so I’m betting the erosion primarily happens during/after rains causing high, fast moving water. I think you’ll want pretty large rocks/concrete at the base (like maybe 2.5’ or 3’). If you own the other side, you can help straighten that section out by excavating that area.






                share|improve this answer

























                  1












                  1








                  1







                  What I’ve seen commonly done is either large rocks or large chunks of concrete dumped to protect the area eroding.



                  You say it is slow moving, so I’m betting the erosion primarily happens during/after rains causing high, fast moving water. I think you’ll want pretty large rocks/concrete at the base (like maybe 2.5’ or 3’). If you own the other side, you can help straighten that section out by excavating that area.






                  share|improve this answer













                  What I’ve seen commonly done is either large rocks or large chunks of concrete dumped to protect the area eroding.



                  You say it is slow moving, so I’m betting the erosion primarily happens during/after rains causing high, fast moving water. I think you’ll want pretty large rocks/concrete at the base (like maybe 2.5’ or 3’). If you own the other side, you can help straighten that section out by excavating that area.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered 2 hours ago









                  UnhandledExcepSeanUnhandledExcepSean

                  1,68131624




                  1,68131624



























                      draft saved

                      draft discarded
















































                      Thanks for contributing an answer to Home Improvement Stack Exchange!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid


                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.

                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function ()
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f162114%2fstopping-real-property-loss-from-eroding-embankment%23new-answer', 'question_page');

                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      Canceling a color specificationRandomly assigning color to Graphics3D objects?Default color for Filling in Mathematica 9Coloring specific elements of sets with a prime modified order in an array plotHow to pick a color differing significantly from the colors already in a given color list?Detection of the text colorColor numbers based on their valueCan color schemes for use with ColorData include opacity specification?My dynamic color schemes

                      Invision Community Contents History See also References External links Navigation menuProprietaryinvisioncommunity.comIPS Community ForumsIPS Community Forumsthis blog entry"License Changes, IP.Board 3.4, and the Future""Interview -- Matt Mecham of Ibforums""CEO Invision Power Board, Matt Mecham Is a Liar, Thief!"IPB License Explanation 1.3, 1.3.1, 2.0, and 2.1ArchivedSecurity Fixes, Updates And Enhancements For IPB 1.3.1Archived"New Demo Accounts - Invision Power Services"the original"New Default Skin"the original"Invision Power Board 3.0.0 and Applications Released"the original"Archived copy"the original"Perpetual licenses being done away with""Release Notes - Invision Power Services""Introducing: IPS Community Suite 4!"Invision Community Release Notes

                      199年 目錄 大件事 到箇年出世嗰人 到箇年死嗰人 節慶、風俗習慣 導覽選單